Titan Effusion Cell Technology
The Titantm crucible and cell technology has been integrated into many of our products from standard effusion cells up to our more advanced patented valved cracking sources.
Titan Effusion Cells
The latest technology for evaporating Ga or In source material. It utilizes a special two-piece graphite crucible that lowers defect counts, improves uniformity and reduces shutter related flux transients.
The latest technology for the deposition of high vapor pressure source material. It utilizes a special three-piece graphite crucible that improves stability and uniformity and reduces shutter related flux transients.
Downward Effusion Cell
An effusion cell designed to accomodate a molten charge in a downward looking port. These are typically used for dopants or to add another group III source to a system.
Standard Effusion Cells
Single Filament Effusion Cell
A highly reliable design that can be used to evaporate a variety of different source materials.
Dual Filament Effusion Cell
Dual filament and dual thermocouple allows users to tailor the thermal profile of the cell.
HT Effusion Cell
Reliable High Temperature effusion cell with operating temperatures to 2000 degrees C.
LT Effusion Cell
Designed to operate at temperatures from 200 to 800 degrees C.
Dopant Effusion Cell
There are multiple configurations available including the standard single dopant cell, the dual dopant cell and a combination dopant source with gas injector.
HR Dopant Effusion Cell
This dopant source is designed specifically for rapid temperature changes especially at low temperatures.
Heated Insert Effusion Cell
The E-Science HI (Heated Insert) Effusion Cell is an effusion cell that utilizes an actively heated crucible insert.
Dual Effusion Cell
The E-Science Dual Effusion Cell provides an “extra port” for those times when you need to add one more source material to your growth chamber.
Miniature Effusion Cell
A Compact Effusion Cell with 6cc capacity, water cooling and a shutter.